{{ $t('shop.all.spaetbestellservice.hinweis') }}
Construction set up | Directly controlled poppet valve |
Actuation type | Electrical |
Sealing principle | Soft |
installation position | arbitrary |
Fastening type | pipe installation |
Fitting connection | G1/8 |
Electrical connection |
Wiring diagram Form A acc. to EN 175301-803, Plug, Square shape, acc. to EN 175301-803 |
Nominal width [mm] | 1,0 |
Valve function | 2/2 closed monostable |
Hand assist actuation | none |
Flow direction | Not reversible |
medium |
Compressed air to ISO 8573-1:2010 [7:4:4], Inert gases, mineral oil, Neutral liquids, Water, Other media on request |
Nominal pressure fitting | 100 |
pressure difference [bar] | 0 |
Coil characteristic value | 230 V AC: 50/60 Hz, pull-in power 18 VA, holding power 15 VA |
Insulation material class | F |
Permitted voltage oscillations | ± 10 % |
Power-on time | 100 % |
Reset mode | Mechanical spring |
Control type | Direct |
Medium pressure [bar] | 0 to 90 |
Max. viscosity [mm²/s] | 22 |
Medium temperature [°C] | -10 to 80 |
ambient temperature [°C] | -10 to 35 |
Leak rate to EN 12266-1 | A |
Flow Kv [m³/h] | 0,06 |
Normal nominal flow [l/min] | 60 |
Shifting time on [ms] | 20 |
Shifting time off [ms] | 18 |
Material information |
LABS containing materials included, RoHs compliant |
Housing material | High-alloyed stainless steels |
Material number housing | 1.4305 |
Seals material | FPM |
Product weight [g] | 500 |
Protection category | IP65 |
Corrosion resistant class KBK | 3 - severe corrosion stress |
CE certificate (see declaration of conformity) | to EU low voltage directive |
{{ $t('shop.all.gewicht') }} | 500 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84818073 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.