{{ $t('shop.all.spaetbestellservice.hinweis') }}
Valve function | 5/2 monostable |
Actuation type | Electrical |
Valve size [mm] | 10 |
Normal nominal flow [l/min] | 360 |
Operating pressure [bar] | -0.9 to 10 |
Construction set up | Piston pusher |
Reset mode | Pneumatic spring |
Permission | c UL us - Recognized (OL) |
Protection category |
IP65, acc. to IEC 60529 |
Sealing principle | Soft |
installation position | arbitrary |
Hand assist actuation |
Ratcheting, tentative |
Control type | pilot operated |
Flow direction | Reversible |
Überdeckung | positive Überdeckung |
Signal condition display | yes |
Control pressure [bar] | 3 to 8 |
Vacuum capable | yes |
Normal nominal flow with QS-6 [l/min] | 360 |
Shifting time off [ms] | 20 |
Shifting time on [ms] | 10 |
Max. positive test impulse at 0 signal [µs] | 400 |
Max. negative test impulse for 1 signal [µs] | 200 |
Permitted voltage oscillations | ± 25 % |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation possible (required in further operations) |
Oscillation strength | Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
Shock resistance | Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27 |
Corrosion resistant class KBK | 1 - low corrosion stress |
Bearing temperature [°C] | -20 to 40 |
Medium temperature [°C] | -5 to 50 |
Relative humidity | max. 90 % at 40 °C |
ambient temperature [°C] | -5 to 50 |
Max. tightening torque Valve fastening [Nm] | 0,25 |
Product weight [g] | 49 |
Fastening type | With throughway bores |
Material information | RoHs compliant |
Seals material | NBR |
Housing material | Aluminium die casting |
{{ $t('shop.all.gewicht') }} | 49 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84812090 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.